| Technical Specifications: | ||||||||
| Engine: | Cat C12 ATAAC, 298 kw. (400 hp) | |||||||
| Fuel Tank: | 600 ltr. With Heater separator (158.5 gallons) | |||||||
| Width: | 3060 mm ( 11.81 ft.) | |||||||
| Height: | 3200 mm (10.50 ft.) | |||||||
| Weight: | +/- 29,000 Kgs. (+/- 63,934 Lbs.) | |||||||
| Speed: | 0 - 6000 meters/hr. (0 - 3.7 miles/hr.) | |||||||
| Voltage: | 24 volt electrical system | |||||||
| Plow is a Semi Parallelogram with triangle | ||||||||
| Articulation curvature of plow in horizontal plane | ||||||||
| 4 degrees to RH or LH, adjustment by means of | ||||||||
| 2 hydraulic cylinders | ||||||||
| Plow blade is 100 mm (3.94 inches) thick with | ||||||||
| wear plates | ||||||||
| Maximum installation depth is 1800 mm (5.91 ft.) | ||||||||
| Depth regulation is controlled by two cylinders, | ||||||||
| driven by either a proportional or bang bang valves | ||||||||
| Large model cabin mounted to main chassis with | ||||||||
| all controls | ||||||||
| Two external shut down switches, one at the front | ||||||||
| and rear of the machine | ||||||||
| Laser mast support is a parallelogram wupport with | ||||||||
| a hydraulic cylinder mounted to the plow housing | ||||||||
| Conversions may not be exactly correct! | ||||||||
|
|
